22000m³/h 2.2kw industrial evaporative air cooler mounted on the window

Advantage:

1. Energy saving: at least 1 kw per hour, low operating cost, and only 1/8 of the power consumption of traditional compressors. 2. Environmental protection: no freon, no heat pollution, integrates deodorization, ventilation, ventilation and cooling. 3. The cooling effect is obvious: generally, the cooling effect can reach 4℃-12℃, and the cooling speed is fast. 4. Large coverage area: the coverage area of ​​each air cooler is 80-300m², the air supply volume per hour is 18000--30000m³, and the air supply distance is long. 5. Less investment and high efficiency (80% investment in central air conditioning can be saved.) 6. The use site can not close the doors and windows to ensure air circulation and increase the oxygen content in the air. 7. Intelligent or manual sewage cleaning function: the sewage time can be freely set and run automatically.

Precautions for The Installation of The Air Cooler:

1. Installation environment When installing the air cooler, it needs to be installed in a relatively place nearby with relatively fresh air, such as the outer wall and the roof. Of course, it is not advisable to install it near the toilet and the kitchen. 2. Installation method The installation should be based on the location, select the appropriate size, determine the construction and installation of the pipeline, whether the link between the brackets is guaranteed, whether the pipeline will be blocked by obstacles, and whether the pipeline and hanger can be installed need to be considered. 3. Installation of exhaust port The operation of the air cooler is inhaling the outdoor air,then through the cooling pad, convey to the indoor continuously , and convecting the hot air and turbid air in the room to achieve ventilation and cooling. Therefore, the number of exhaust outlets needs to be configured in a certain scale. The inlet and outlet ports should be kept in a ratio of 1:1. If there are many heating devices in the workshop and there is no exhaust port, enough exhaust ports should be opened at a height of more than 3 meters, or other equipment should be used to extract indoor hot air, in order to achieve the ideal ventilation and cooling effect.

Other Specification Parameter

Model	Air volume（m³/h）	Power （KW)	Voltage（V）	Outlet dimension (mm）	Application area （㎡）	Dimension ( L*W*H) （mm）
YNC-180	18000	1.1/1.5	380	670*670	80-120	1080*1080*950
YNC-220	22000	2.2	380	670*670	100-150	1180*1180*1160
YNC-300	30000	3.0	380	800*800	150-200	1300*1300*1180